Gravity & Gravity Pro - Repair Videos
🔧 How to Replace Cover Motor (Gravity)
What is the Cover Motor (Small Lid)?. The Cover Motor is a small motor located behind the small lid that allows it to open automatically. When is Cover Motor replacement needed?. This part typically needs replacement when the small lid does not open
🔧How to replace Control PCB (Gravity)
What is the Control PCB?. The Control PCB is located beneath the Power, Dry, Purify, and Open buttons, and controls all button operations on the unit. When is Control PCB replacement needed?. Control PCB issues typically show up in one of the followi
🔧How to replace Fan Motor (Gravity)
What does the Fan Motor do?. The Fan Motor is located in the rear case (back of the unit) and circulates air inside the Reencle. When the unit is powered on, the fan runs continuously at a standard speed. Pressing the Purify or Dry button increases t
🔧How to replace Mixing Motor (Gravity)
What is the Mixing Motor?. The Mixing Motor is the motor that rotates the stirring rod. The motor used in Prime is a DC motor. 1️⃣Mixing Motor replacement is required in the following cases:. Magnet Test
🔧How to replace Main PCB (Gravity)
What is the Main PCB?. The Main PCB is the internal component that stores the unit's operating logic and internal temperature settings. Before you begin:. ⚠For accurate diagnosis and replacement guidance, please consult with a live agent before proce
🔄 How to use Carbon Filter Refill (Gravity)
Video instructions on how to refill the activated carbons inside the Reencle Filter
🔄 Mesh Filter Cleaning & Replacement (Gravity)
The mesh filter is located inside the chamber (inner bucket) — you'll see it at the front when you open the cover. It's held in place by a lever. It has no fixed replacement cycle — as long as it isn't damaged, it can be used semi-permanently. 2️⃣ Wh